background image

4

Please read these instructions. All the safety and operating instructions should be read before the 
appliance is operated.

Warnings

To reduce the risk of fi re, electric shock or damage to the television, do not expose it to  

 

• 

  dust, rain or moisture, or place any objects fi lled with liquids on or near the television.

Do not place the television in a confi ned space, ensure that nothing can obstruct the   

 

• 

ventilation openings at the rear of the television.

Do not place naked fl ames on or near the television.

• 

Dispose of this television and any components including batteries in an environmentally  

 

• 

friendly manner. If in doubt, please contact your local authority for details of recycling.

Safety

For your safety, this appliance is fi tted with a fused moulded 3 pin mains plug. Should  

 

• 

  the fuse need to be replaced, ensure that any replacement is of the same amperage and  

 

  approved with the BSI mark. 

Never try and replace the mains plug unless you have adequate qualifi cations and are  

 

• 

  legally authorised to do so. In the event that a replacement Mains cable is required,    

 

  contact the manufacturer for a suitable replacement.

Never use the television if it is damaged in any way.

• 

Always place the television on a fl at level surface avoiding anywhere which may be subject  

 

• 

  to strong vibration. 

Ensure the television is not placed on top of the power cable as the weight of the  

 

 

• 

  television may damage the cable and cause a safety hazard.

Never place mobile phones, speakers or any other device which may cause magnetic or  

 

• 

  radio interference with the television. If interference is apparent, move the device causing  

 

  the interference away from the television.

Maintenance

To clean this unit, wipe with a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth dipped 

• 

in a soap and water solution or a weak detergent solution.

Use eyeglass cleaner to remove stubborn dirt from the LCD/LED Screen.

• 

Never use alcohol, paint thinner or benzene to clean this unit.

• 

Before using a chemically treated cloth, read the instructions that  

 

• 

  came with the cloth carefully.
CAUTION: If water or other liquid enters the television through the display panel 
surface, a malfunction may occur.

Packaging

The safest way to transport your item is in the original box/packaging - please save your  

 

• 

  packaging for this.

You will need original box/packaging in the event of warranty/service repair or support. We are unable  

• 

  to carry out warranty/service if you are unable to package it correctly. 

IMPORTANT SAFETY INSTRUCTIONS

TEchnika Manual 19-22-220 .indd   Sec1:4

TEchnika Manual 19-22-220 .indd   Sec1:4

13/01/2010   13:03:17

13/01/2010   13:03:17

Summary of Contents for 19-220






























Reviews: