Insert the drip-cover DIN rail plate into the DIN
rail bracket on the back of the drive.
*Note installation of the drip-cover is optional and should
be considered based on the environment. The drip-cover
is used to protect from falling debris and water.
STEP 1*
TECHTOP GENERAL PURPOSE MICRO DRIVES, TD20 NEMA 1 KIT INSTALLATION GUIDE
1
Align the mounting holes of the drip-cover with
the mounting holes of the DIN rail plate. Use
the four screws to secure the drip-cover to the
mounting plate.
Screw quantity: 4
Screw specifications: M4x10
*Note installation of the drip-cover is optional and should
be considered based on the environment. The drip-cover
is used to protect from falling debris and water.
STEP 2*
Place the junction box base on the back of the
drive so the mounting holes align with the bottom
mounting holes of the drive.
STEP 3
TOPDRIVE20 SERIES
NEMA 1 KIT INSTALLATION GUIDE
