background image

 

1/2 

www.teclinediving.eu

    

DIVE LIGHTS TECLINE T2 / T6

 

USER MANUAL 

Thank you for choosing Tecline T2 / T6 dive light. 

Should you have any questions, please contact us via e-mail: 

scubatech@scubatech.pl

.  

PURPOSE AND FUNCTION 

 

Tecline T2/T6 dive lights are designed for underwater use. 

 

To turn the torch on and off, press and hold the control button for 2-3 seconds. 

 

To switch between the operating modes (100% / 50% / 20%) briefly press the control button. 

 

A quick, double press on control button activates the "boost" mode. The light output is then 2000 
lumens (for Tecline T2) or 6000 lumens (for Tecline T6 torch). Note: the "boost" mode significantly 
shortens the burning time of the T6 light (over a dozen of minutes). 

 

The light under the control button indicates the battery status (voltage):   
- green light: 4.2-3.6 V – red light: 3.5-3.2 V – blinking red light: 3.1-2.7 V. The light switches off 
automatically when the voltage drops to 2.6 V. 

 

The light can be easily operated with one hand.  

WARNING! 

!

) Avoid looking directly into the beam. The light may permanently damage your eyesight. 

!

) Avoid using the light out of water. Overheating may damage the LED cell.  

!

) Do not open the battery compartment under water. Water in the battery compartment may damage 

the light and/or the battery. Such damage is not covered by warranty. 

MAINTENANCE AND STORAGE 

 

The light should be thoroughly rinsed in fresh water after every use. 

 

 

All o-rings should be replaced every 12 months. 

 

 

The light should be stored in a dry place at room temperature.

 

PARAMETERS 

 

Material: Aluminium T6061 with hard anodised coating

 

 

Source of light: LED cell with a lifetime of 50 000 hours

 

 

Luminous power: 

- Tecline T2: 1500 lumens / 2000 lumens (in „boost” mode) 
- Tecline T6: 2500 lumens / 6000 lumens (in „boost” mode)

 

 

Light temperature: 6000K – 6500K

 

 

Light focus: 8-10

o

 

 

Maximum operational depth: 150m 

 

 

Control button SS316 with battery status control light

 

 

Modes of operation: 100% - 50% - 20% - additional „boost” mode

 

 

Burning time in the default mode (100% power):  

- Tecline T2: 125min 
- Tecline T6: 75min

 

 

Net weight: 240g (without battery)

 

 

Power supply: Li-Ion Battery 26650 

 

Reviews: