Teltex
GLT Captioning Tablet
with V2T-10
Quick Setup Guide
Step 3.
Connect the 3.5mm Stereo Audio Cable from the Geemarc V2T-10 to
the Android Tablet. Connect the Tablet Power Cable from the
Android Tablet charging port to the Tablet Power Supply. Then
connect the Tablet Power Supply to an Electrical Outlet.
Step 4.
Turn on the Geemarc V2T-10 and set to “Auto” position.
Step 5.
Turn on the tablet by holding down the On/Off button for 5 seconds.
Step 6.
Start using your Teltex GLT Tablet to caption all of your calls.
Electrical
Outlet
Tablet
Power Cable
Tablet
Power Supply
Android Tablet
3.5mm Stereo
Audio Cable
Short Line Cord
Handset
Curly Cord
Geemarc
V2T-10
Home Phone
For Setup Videos Visit:
https://www.iaccessibility.com/videos/deaf-hard-of-hearing/
