background image

Quick Guide

TempSen

®

 

ITAG

®

3 Series Temperature Recording Labels

Actions

LED Sequences

Start Recording

 & 

 flash in turn for 3 times

During Recording

-No Alarm-

 flashes every 10 seconds

During Recording

-Alarmed-

 flashes every 10 seconds

Stop Recording

 & 

 flash for 3 times

After Stopped 

-No Alarm-

 flashes 2 times every 2 seconds

After Stopped 

-Alarmed-

 flashes 2 times every 2 seconds

Connecting to PC

 & 

 become solid. 

 

lights off 1 second after connected 

indicating processing data.

1> Overview

2> Operation Instructions

4> LED Indication

5> Important Information

©2015. All rights reserved, TempSen Electronics Company

T: +86 21 6768 5210  F: +86 21 6768 5232  E: info@tempsen.com  W: www.tempsen.com

3> Battery

Battery Expiry Date (EXP Date) is printed on the rear side of 

each logger, ITAG3 may stop recording if it's used later than 

EXP Date, so please check EXP Date every time starting an 

ITAG3 to avoid recording failure.

QG_ITAG3_150327_EN_CN REV. A

Water Proof

 

Packaging

LED Indicators 

USB Connector

Start Recording

Press button and hold for 5 

seconds to start. LEDs flash in turn 

for 3 times indicating data logger 

successfully starts recording.

Take off the serial number 

sticker for the record purpose.

Press button and hold for 5 

seconds to manually stop 

recording, then tear open 

package to expose the USB plug. 

Logger also would stop recording 

after running out preset logging 

cycle.

Plug ITAG3 data logger into USB 

port of PC. 

a) You could download data  

from 

ITAG3 Pro 

by copying PDF 

data report from removable 

storage device 

TempSenDisk.

b) You also could download 

ITAG3 and ITAG3 Pro logger using 

TempCentre software.

Please download TempCentre 

from www.tempsen.com

1

Serial Number Sticker

Stop Recording

Download Data

2

3

4

To avoid unnecessary loss to your goods, please do 

not use the data logger without LED response after 

started.

TempSen warrants this TempSen-branded hardware product against defects in 

materials and workmanship under normal use for a period of ONE (1) YEAR from the 

date of retail purchase by the original end-user purchaser (“Warranty Period”). If a 

hardware defect arises and a valid claim within the Warranty Period, as its option 

and to the extent permitted by law, TempSen will either (1) repair the hardware 

defect at no charge, using new parts or parts equivalent to new in performance 

and reliability, (2) exchange the new product with a product is new or equivalent 

to new in performance and reliability and is at least functionally equivalent to the 

original product, or (3) refund the purchase price of this product. TempSen may 

request that you replace defective parts with new or refurbished user-installable 

parts that TempSen provides in fulfillment of its warranty obligation. A replacement 

product or parts, including a user-installable part that has been installed in 

accordance with instructions provided by TempSen, assumes the remaining 

warranty of the original product or ninety (90) days from the date of replacement 

or repair, whichever provides longer coverage for you. When a product or part is 

exchanged, any replacement item becomes your property and the replaced item 

becomes TempSen’s property. Parts provided by TempSen in fulfillment it’s warranty 

obligation must be used in products for which warranty service is claimed. When 

a refund is given, the product for which the refund is provided must be returned to 

TempSen and becomes TempSen’s property.
EXCLUSIONS AND LIMITATIONS

This Limited Warranty applies only to the hardware product manufactured by or for 

TempSen that can be identified by the “TempSen” trademark, trade name, or logo 

affixed to it. The Limited Warranty does not apply to any non-TempSen hardware 

product or any software, even if packaged or sold with the TempSen hardware. 

Manufacturers, suppliers, publishers, other than TempSen, may provide their own 

warranties to the end user purchaser, but TempSen, in so far as permitted by law, 

provides their products “as is”. Software distributed by TempSen with or without the 

TempSen brand name (including, but not limited to system software) is not covered 

under this Limited Warranty. Refer to the licensing agreement accompanying the 

software for details of your rights with respect to its use.
TempSen does not warrant that the operation of product will be uninterrupted or 

error-free. TempSen is not responsible for the damage arising from failure to follow 

instructions relating to the product’s use.
This warranty does not apply: (a) to consumable parts, such as batteries, unless 

damage has occurred due to a defect in materials or workmanship; (b) to 

cosmetic damage, including but not limited to scratches, dents, and broken plastic 

on ports; (c) to damage caused with non-TempSen products; (d) to damage 

caused by accident, abuse, misuse, flood, fire, earthquake, or other external 

causes; (e) to damage caused by operating the product outside the permitted or 

intended uses described by TempSen; (f) to damage caused by service (including 

upgrades and expansions) performed by anyone who is not a representative of 

TempSen or TempSen Authorized Service Provider; (g) to a product or part that has 

been modified to alter functionality or capability without the written permission of 

TempSen; or (h) if any TempSen serial number has been removed or defaced.
IMPORTANT: DO NOT OPEN THE HARDWARE PRODUCT. OPENING THE HARDWARE 

PRODUCT MAY CAUSE DAMAGE THAT IS NOT COVERED BY THIS WARRANTY. ONLY 

TEMPSEN OR AN AUTHORIZED SERVICE PROVIDER SHOULD PERFORM SERVICE ON 

THIS HARDWARE PRODUCT.

6> Warranty

Please call us at +86 21 6768 5210 or send email to 

support@tempsen.com for technical assistance.

a) To avoid damaging your ITAG3 data logger, please do not 

disconnect it from USB port while it is communicating with the 

computer.b) Data stored in ITAG3 data logger is retrievable even 

battery runs out. c) ITAG3 data logger uses CR2032 lithium battery, 

please do not heat, microwave or recharge it. d) Please follow local 
regulations when recycling or disposing of ITAG3 data logg

ers.

Summary of Contents for ITAG3 Series

Page 1: ...of the original product or ninety 90 days from the date of replacement or repair whichever provides longer coverage for you When a product or part is exchanged any replacement item becomes your property and the replaced item becomes TempSen s property Parts provided by TempSen in fulfillment it s warranty obligation must be used in products for which warranty service is claimed When a refund is gi...

Page 2: ...n com 免费下载 1 序列号标签 停止记录 下载数据 2 3 4 为避免不必要的数据缺失带来的麻烦 请勿使用启动后 LED 指示灯无响应的产品 腾森电子承诺产品至销售之日起保质期为壹年 在保质期内由于产品本身部件或工艺质量缺 陷引起的问题 请及时通知我们 我们会视具体情况提供如下方式中的其中一种处理方式 1 免费维修或者部件替换 2 免费整机替换 3 退款处理 退款处理的产品必须返还至腾森电子 责任免除和限制条款 本保修条款仅适用于由腾森电子制造的或冠以 TempSen 商标的硬件产品 任何非腾森 电子的硬件或软件将不适用于本保修条款 即使这些产品将会和腾森电子制造的硬件一起包 装出售 其他硬件供应商会提供自己的保修条款给最终用户 由腾森电子提供的软件 腾森 电子旗下软件或其他供应商的软件 不适用于本保修条款 详情参考软件所附许可协议细节 腾森电子不保证产品操作无任何差错或错误 腾森电...

Reviews: