KIT NO. 613087
36V TRANSAXLE REPLACEMENT KIT
Page 1 of 2
613088 Rev. 00 (02–02) Tennant Company Commercial Products Printed in U.S.A
INSTALLATION INSTRUCTIONS:
(Installation Time: 2 hours)
TOOLS REQUIRED: 7/16”, 9/16”, 11/16” Socket Wrench,
Small Flat Head Screwdriver and Snip Pliers.
1. Remove batteries from machine, 9/16”
wrench required.
FOR SAFETY: When servicing machine, wear
safety glasses and protective gloves when
handling batteries or battery cables. Avoid con-
tact with battery acid.
2. With adequate assistance, carefully turn
the machine upside down to access the
drive transaxle motor (Figure 1).
Fig. 1
3. Remove the wheels from the old transaxle,
7/16” socket wrench required (Figure 2).
Fig. 2
KIT CONTENTS
P/N.
Description
Qty.
612845
TRANSAXLE, 36V MOTOR, 116 RPM
1
612908
ADAPTER, WIRE TRANSAXLE
1
140501
NUT, 1/4–20
8
602881
BRACKET, TRANSAXLE MOUNT
1
130040
WIRE TIE 6.0 x .12
2
4. Carefully cut the wire-tie that secures the
motor’s wire harness, then unplug the wire
harness connector. Use a small flat head
screwdriver to disengage the connector
plug (Figure 3).
Fig. 3
5. Remove the transaxle mounting brackets
and motor guard bracket,11/16” wrench re-
quired. Then remove the old transaxle from
the machine (Figure 4).
Fig. 4
Home
