DO NOT RETURN this product to the store!
Please call our toll-free help line at 1-800-768-1969
or visit TERK.com
IMPORTANT:
Don’t plug the
amplifier’s power cord into a power
outlet yet.
Quick
Start Guide
Trinity Amplified HDTV Antenna
Find the best location for your
antenna.
1
STOP!
Ver
sión
en español
al dor
so
TV antennas perform best
when facing the direction of
the broadcaster’s tower.
For help finding your local
broadcast towers, go to
www.TERK.com
Connect the antenna to the
provided amplifier
4
Plug in the amplifier’s power cord
to a power outlet.
6
Antenna Placement Tips
Avoid metal surfaces (like a metal stand).
Move the antenna close to or in a window.
Position the antenna as high as possible.
Connect the amplifier to your TV
or digital converter box.
5
TV or
converter
box (back)
Amplifier
ANTENNA
TV/STB
ANTENNA
IN
Most TVs have a channel scan option in their menu
system, many times in a SETUP or CHANNEL menu
under ANTENNA. For detailed instructions on
performing a channel scan, see the owner’s manual
that came with your TV.
Scan for channels on your TV.
7
Check out setup videos at
www.TERK.com/Setup
Antenna (back)
Built-In
Coaxial Cable
Amplifier
ANTENNA
TV/STB
You can use this antenna with or without
its amplifier. Try with the amplifier first—it
provides the best performance in most
situations.
IMPORTANT:
Make sure
your TV is
turned off.
Raise the antenna’s three
elements.
3
TRITVA2Z QSG 00
Raise the three
elements to their
upright position for
best performance.
IMPORTANT:
For some channels you might get better
performance with the Trinity antenna in a different position
or facing a different direction. Sometimes just a little bit of
adjustment can make a difference!
Place the antenna.
2
Place the antenna on a flat surface next to your TV,
facing the direction where most of your broadcast
towers are located.
For wall-mounting,
raise the three antenna
elements to their full
180-degree position.
Alternate Mounting Option
This antenna can be mounted to a wall as well. To mount this
antenna to a wall: Install the included wall-mount screws (and
anchors, if needed) where desired. Align the keyholes on the
bottom of the antenna with wall-mounted screws, then lock the
antenna into place.
