background image

 

 

 

Page 1 

If you have need assistance or have questions, email 

techsupport@gill-electronics.com

 

 

 

 

 

INSTALLATION INFORMATION FOR 

CUSTOMERS & INSTALLERS 

 

WIRELESS POWER TRANSMITTER 

 

 

Model Number: WPT171AT / WPT170AT 

OF DOCUMENT

 

IMPORTANT 

– PURPOSE OF DOCUMENT 

 

THIS DOCUMENT IS FOR USE BY CUSTOMERS WHO PURCHASE THE REFERENCED TESLINK

TM

 

PRODUCTS FROM GILL 

ELECTRONICS, INCORPORATED OR ITS AFFILIATES (GILL). NEITHER THIS DOCUMENT NOR THE INFORMATION IN THIS 
DOCUMENT IS INTENDED FOR DISTRIBUTION TO, OR USE BY, END USERS OF GILL PRODUCTS WHICH INCORPORATE 
TESLINK

TM

 

COMPONENTS. BY PURCHASING TESLINK

TM

 PRODUCTS FROM GILL, EACH CUSTOMER ASSUMES, AND SHALL 

HAVE FULL RESPONSIBILITY FOR, PROVIDING APPROPRIATE INSTRUCTIONS FOR USE OF SUCH OEM PRODUCTS.  
 
GILL ASSUMES THAT ALL CUSTOMERS WHO PURCHASE FROM GILL AND WHO USE THIS DOCUMENT HAVE EXPERTISE IN 
THE USE OF ELECTRICAL DEVICES AND COMPONENTS, INCLUDING THE EXPERTISE NECESSARY TO (i) DETERMINE 
WHETHER OR NOT TESLINK

TM 

COMPONENTS ARE SUITABLE FOR USE WITH 

THE OEM’s PRODUCT(S), AND (ii) PROPERLY 

AND SAFELY CONFIGURE AND INSTALL TESLINK

TM

 PRODUCTS. FOR USE BY THE CUSTOMER AND NOT AS A SUBSTITUTE 

FOR THE 

CUSTOMER’S EXPERTISE OR GILL’S RESPONSIBILITY FOR PROPER AND SAFE DESIGN OF ITS PRODUCT AND 

INSTALLATION AND USE OF TESLINK

TM 

PRODUCTS. IF ANY CUSTOMER USING THIS DOCUMENT LACKS SUCH EXPERTISE 

OR DOES NOT AGREE TO THE FOREGOING PURPOSE STATED FOR THIS DOCUMENT, SUCH CUSTOMER SHOULD 
IMMEDIATELY NOTIFY GILL IN WRITING TO THAT EFFECT AND SHOULD NOT USE THIS DOCUMENT. PRICES AND OTHER 
TERMS AND CONDITIONS FOR SALE OF TESLINK

TM

 PRODUCTS TO ANY CUSTOMER ARE GOVERNED BY SEPARATE 

DOCUMENTS ISSUED OR MADE AVAILABLE TO THE CUSTOMER BY GILL, INCLUDING THE INVOICE ISSUED BY GILL AND 
THE STANDARD TERMS AND CONDITIONS OF SALE. 
 
THIS DOCUMENT IS INTENDED TO PROVIDE INSTALLATION AND USE REQUIREMENTS AND GUIDELINES FOR ALL SAFETY 
AND OPERATING REQUIREMENTS INCLUDING BUT NOT LIMITED TO ELECTRICAL AND RF EXPOSURE. THIS DOCUMENT IS 
AN INTEGRAL 

COMPONENT OF THE EQUIPMENT’S AUTHORIZATION AND THE INSTRUCTIONS HEREIN ARE MANDATORY IN 

ORDER TO COMPLY WITH REGULATORY AUTHORIZATION. 

 
 

Summary of Contents for WPT171AT






Reviews: