Texas Instruments TI-84 Plus CE Python Getting Started Download

Page: 1 / 6

Texas Instruments Incorporated

education.ti.com

TI-84 Plus CE Python – Tello Drone

Getting Started

Tello Drone

Installation of ti_runtime and 84 Plus CE Tello modules

Determine if your micro:bit card is a V1 or V2. The V2 card has scallops

on the board's gold edge, while the V1 is straight.

The Tello Drone only

works on a V2 board.

Download and unzip the Tello .zip file to a

convenient location on your computer, such as your desktop. Locate

the 2.x.x ti-runtime.hex file.

on how to configure your Tello drone.

Connect the micro:bit to your computer using a micro USB cable. The

micro:bit will appear as a flash drive icon on the computer. Drag and

drop the 2.x.x ti-runtime.hex file to the micro:bit icon. Alternatively,

left-click on the file and use the 'Send to' command to copy from the

Tello folder to the micro:bit card. This file provides functionality

between the TI-84 Plus CE Python

and the micro:bit card. The

ti_runtime installation is a one-time process. If the micro:bit is

connected back to the PC and programmed in a different language

other than Python, such as MakeCode, the ti_runtime.hex will need to

be installed again. See additional information at the end of the

document.

Summary of Contents for TI-84 Plus CE Python






