Quick Start Guide R-UHF-R700 reader reader
UM001913
Page 1 / 4
Rev. 1.0 – 2 Jun 2022
Quick Start Guide for R-UHF-R700 reader
This guide explains how to start integrating the UHF RFID reader in your laundry.
A.
Reader connectors and indicators
Refer to the following pictures to identify reader’s connectors and LED indicators.
B.
Power the RFID reader
The R700 reader is powered exclusively through Power over Ethernet (PoE or PoE+) via Ethernet port. If your
local network doesn’t support PoE/PoE+ or in case you want to connect the reader to your local PC, you can
power it simply adding a PoE/PoE+ power injector (sold separately) to add inline power to a standard network
connection.
Status LEDs
Antenna 1 and
its status LED
Antenna 2 and
its status LED
Antenna 3 and
its status LED
Antenna 4 and
its status LED
10/100/1000 Base-T Ethernet
Power over Ethernet (POE/PoE+)
3x USB Type A
Default
restore button
GPIO Phoenix contact
2 inputs, 3 outputs
micro USB
