SAME-DAY
®
STAIN
Fiberglass Door Finishing Kit
Easy-To-Follow Instructions
STEP 1: CLEAN THE DOOR
Use a cleaning rag to clean the entire surface of your door
with
mineral spirits.
STEP 2: PREPARE THE DOOR
Mask off any glass, hardware and weather-stripping.
1
2
Tip:
Weather-stripping may be removed from jambs by
gently pulling it out. Re-insert weather-stripping by
pushing it in after door is completely finished and dry.
STEP 3: STIR THE STAIN
Stir well. Improperly mixed stain will not dry.
STEP 4: PRACTICE WITH PROVIDED
SAMPLES
Stain Color Test Sample.
This sample should match the
color of your unfinished door. Use this sample to do the
following quick color test before staining.
Using the staining rag, work the stain into the grain in a
circular or cross-grain motion.
For lighter shades, wait a
few minutes, then rub off excess stain. For darker shades,
repeat. If you want to start over, the stain can easily be
removed with mineral spirits.
Remaining Test Sample.
Set it aside for now; you’ll be
using it in Step 8.
3
4
