background image

1

www.UsePhoenix.com  •  sales@UsePhoenix.com

Toll-Free 1-800-533-7533

Owner’s Manual   —   Phoenix 270HTx

Installation, Operation & Service Instructions

Read and Save These Instructions

 The Phoenix 270HTx LGR,  

High Capacity Dehumidifier 

 

 

Specifications subject to change without notice.

TS-584

01/13

4201 Lien Rd.• Madison, WI 53704

•  Automatic Bypass Technology – 

Patented 

technology automatically adjusts for 
temperature variation, increasing performance 
over a wider operating range.

•  High Capacity - 

Removes 161 pints per day at 

AHAM

•  8.9 amps - 

Removes over 6.5 pints/kWh.

•  R-410A Refrigerant
•  More Grain Depression - 

Drier air from an 

LGR finishes jobs quicker versus a conventional 
refrigerant dehumidifier.

•  Focused Airflow - 

Patented focused outlet 

directs air downward across the wet surface.

•  Motorized Impeller - 

380 CFM; Faster drying 

and superior static pressure for ducting.

•  Multiple Ducting Options - 

12” intake, 10” 

exhaust.

•  Solid State Controls - 

Easy to read and 

operate.

•  Recessed 12” Wheels - 

Allows greater 

maneuverability on the job site and efficient 
storage. Rolls over obstacles with ease.

•  MERV-11 Pleated Media Air Filter 

 

The Phoenix 270HTx is one of the most effective and versatile drying devices available. The Phoenix 270HTx features more 
water removal (161 pints per day@AHAM) and higher grain depression than other refrigerant dehumidifiers, while drawing only 
8.9 amps of electricity.
The 270HTx features Phoenix’s patented bypass design, which is now enhanced to compensate for temperature automatically.  
By sensing and adjusting to temperature changes in the drying chamber, the 270HTx maximizes water removal over an 
extended operating range without the need for manual adjustments.  
At higher temperatures, where typical LGRs lose effectiveness, the Phoenix 270HTx automatically adjusts to continue removing 
moisture. This offers several advantages to the restorer, including faster evaporation rates, quicker drying, and elimination of 
the need to remove or modify equipment for temperature control. 

Phoenix 270HTx
Part No. 4028600
Patent  7,246,503 

  

7,281,389 

  

7,540,166 

  

8,347,640

Summary of Contents for 4028600











Reviews: