background image

MO-437 
ECN 4229-PH 

  

MADE IN USA

 

 

OIL FIRED FURNACE 

INSTALLATION AND OPERATION MANUAL

  

WITH USERS INFORMATION SECTION 

 

MODEL: 

OH6FA072D48B 

OH6FA072DV4B 

OH6FA072D48R 

OH6FA072DV4R 

c

 WARNING

IF THE INFORMATION IN THESE INSTRUCTIONS IS NOT FOLLOWED EXACTLY, A FIRE 

OR EXPLOSION MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY, OR LOSS OF LIFE. 

DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND LIQUIDS IN THE VICINITY OF 
THIS OR ANY OTHER APPLIANCE. 

c

 WARNING:

 IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE, OR MAINTENANCE 

CAN CAUSE INJURY OR PROPERTY DAMAGE. REFER TO THIS MANUAL. FOR ASSISTANCE OR 
ADDITIONAL INFORMATION CONSULT A QUALIFIED INSTALLER, OR SERVICE AGENCY.

 

 
PLEASE READ THESE INSTRUCTIONS PRIOR TO INSTALLATION, INITIAL FIRING, AND BEFORE 
PERFORMING ANY SERVICE OR MAINTENANCE. THESE INSTRUCTIONS MUST BE LEFT WITH THE 
USER AND SHOULD BE RETAINED FOR FUTURE REFERENCE BY QUALIFIED SERVICE PERSONNEL.

 

 

 

 

 

 

 

 
THERMO PRODUCTS, LLC. 

 

    PO 

BOX 

217 

    NORTH 

JUDSON, 

IN 

46366

 

    PHONE: 

(574) 

896-2133 

  

 

 

 

 

Summary of Contents for OH6FA072D48R


















Reviews: