background image

1

1.

 

IMPORTANT SAFETY INSTRUCTIONS

Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if
improperly  handled.  This  product  has  been  engineered  and  manufactured  with  the  highest  priority  on  safety.  But
IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent
potential danger, please observe the following instructions when installing, operating and cleaning the  product. To
ensure  your  safety  and  prolong  the  service  life  of  your  LCD  TV  product,  please  read  the  following  precautions

carefully before using the product.

1.Read instructions

—All operating instructions must be read and understood before the product is operated.

2.Retain instructions

—These safety and operating instructions must be kept in a safe place for future reference.

3.Observe warnings

—All warnings on the product and in the instructions must be observed closely.

4.Follow instructions

—All operating instructions must be followed.

5.Water and moisture

Do not use this product near

water  -  for  example,  near  a  bathtub,  washbowl,
kitchen  sink,  or  laundry  tub,  in  a  wet  basement,  or
near a swimming pool, and the like.

Do  not  use  immediately  after  moving  from  a  low
temperature to high temperature environment, as this
causes  condensation,  which  may  result  in  fire,
electric shock, or other hazards.
Moisture  in  rooms  where  the  set  is  installed  should
not exceed 85% humidity

Leave  the  condensation  to  evaporate  before  turning
the TV on again.

6.Cleaning

— 

Unplug this product from the wall

outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
Clean the screen with a glass care cleaner and the rest
of the set with a soft cloth and neutral detergent.
Regularly dust the vents at the back and sides. Using
solvents, abrasive or alcohol based products risk

damaging the TV.

Caution 

: the screen of your LCD TV may be

damaged if it is cleaned with strong detergents,
alcohol or abrasive products.

7.Ventilation

—The vents and other openings in the

cabinet are designed for ventilation. Do not cover or

block these vents and openings since insufficient
ventilation can cause overheating and/or shorten the
life of the product. Do not place the product on a bed,
sofa, rug or other similar surface, since they can
block ventilation openings. This product is not
designed for built-in installation; do not place the

product in an enclosed place such as a bookcase or
rack, unless proper ventilation is provided or the
manufacturer’s instructions are followed.

8.Heat sources

—Keep the product away from heat

sources such as radiators, heaters, stoves and other
heat-generating products (including amplifiers).

The TV components are sensitive to heat. The
maximum ambient temperature should not exceed 35

0

celsius.

Summary of Contents for 15LCDM03B
























Reviews: