background image

2

To take maximum advantage of all the features of your satellite receiver,
please read this user manual very carefully.

ASR 08 T SATELLITE RECEIVER

The package contains the following items :
• Satellite receiver
• Remote control unit
• SCART cable

• Two batteries, type R03 (AAA)
• User manual
• List of pre-programmed channels
In the unlikely event of one of these items being missing, please contact your dealer.

REMOTE CONTROL

Installing the batteries
Remove the battery compartment cover,

located at the back of the remote control unit.
Insert the two 1.5-V (AAA) batteries.

Be sure to observe polarity.

For your information
If the remote control seems to have stopped operating correctly,
replace the batteries. 

Warning
- Do not expose the batteries to excessive heat (sun, fire, etc.).

- Do not recharge ordinary batteries.
- Do not let children play with batteries;  they may try to swallow them.

- Consult a doctor immediately if a battery has been swallowed. 

Protect the environment!
• Do not dispose of used batteries via the rubbish bin.

• Place them in the containers provided for this purpose.
• Find out where such containers are located in your area.

+

-

+

-

Summary of Contents for ASR08T

















Reviews: