Thonk Loose Fruit, Instructions Manual

Jan 9th 2019 

www.thonk.co.uk 

1 

God’s Box – Loose Fruit 

Eurorack DIY Kit 

Instructions 

Version 1.1 

OVERVIEW 

 
 
 
 
For the most recent version of this 
document please visit 

https://www.thonk.co.uk/documents/gbox 
 

This document has hi-res images. ZOOM 
IN for a closer look 

 
All    Thonk  kits  are  sold  under  our  standard  Terms  and  Conditions  - 

http://www.thonk.co.uk/faq/

DIY INSTRUCTIONS 

 
This document gives detailed instructions that assume you have purchased a 
complete kit from 

www.thonk.co.uk

. It also assumes no previous knowledge 

of  electronics.  To  learn  to  solder  try 

http://youtu.be/I_NU2ruzyc4

  and  the 

Adafruit guide to excellent soldering

 – http://

bit.ly/1l77tF4 

Watch and understand that whole YouTube video! If you’re not achieving the 

results shown in the video then you need to buy new tools or seek advice. 

You will not end up with a working module otherwise. 

TOOLS REQUIRED 

 
Soldering iron, snipe nose pliers, wire strippers, small flat head screwdriver 
and diagonal cutters AKA snips AKA side-cutters. A Digital Multimeter is 
always helpful for checking for bad solder joints and continuity. Thonk sell a 
range of inexpensive tools here - 

http://bit.ly/1jxqF3n