Thonk TouellSkouarn Strakal Brulu, Instructions Manual

!

!

October 25

th

 2013 

www.thonk.co.uk 

1 

TouellSkouarn 
Strakal Brulu Module 

Eurorack DIY Kit 

Instructions 

Version 1.0 

OVERVIEW 

 
For the most recent version of this 
document please visit 

http://www.thonk.co.uk/documents/strakal

For  all  technical  support  please  visit 

http://bit.ly/1h4aVPk

 on Muffwiggler. 

 
The Strakal Brulu manual is here  

http://www.thonk.co.uk/documents/strakal/
StrakalBrulu_ReGrenvEo.pdf 
 
 

 
All    Thonk  kits  are  sold  under  our  standard  Terms  and  Conditions  - 

http://www.thonk.co.uk/faq/

DIY INSTRUCTIONS 

 
This document gives detailed instructions that assume you have purchased a 
complete kit from 

www.thonk.co.uk

. It also assumes no previous knowledge 

of  electronics.  To  learn  to  solder  try 

http://youtu.be/I_NU2ruzyc4

  and  the 

Adafruit guide to excellent soldering

 – http://

bit.ly/1l77tF4!

Watch and understand that whole YouTube video! If you’re not achieving the 

results shown in the video then you need to buy new tools or seek advice. 

You will not end up with a working module otherwise. 

TOOLS REQUIRED 

 
Soldering iron, snipe nose pliers, wire strippers, small flat head screwdriver 
and diagonal cutters AKA snips AKA side-cutters. A Digital Multimeter is 
necessary for calibrating this module accurately but you can do it by ear to 
taste. Thonk sell a range of inexpensive tools here - 

http://bit.ly/1jxqF3n

IF YOUR KIT IS DATED 2016
CLOSE THIS DOCUMENT AND 
DOWNLOAD THE V1.3.1 MANUAL
INSTEAD:
thonk.co.uk/documents/strakal/