QUICK START GUIDE for:
APEX SWING AWAY
9027
DO
DO NOT
• Attach swing arm and upright
assembly as shown (STEP 1).
• Pull back on Auto Pin to engage in
receiver hole. Use knob to tighten.
Lock (STEP 3).
• Load heaviest bike first - front to
the right (STEP 7).
• Alternate bike direction.
• Secure bicycle to rack with rubber
straps and black safety strap
through the frames and around
the mast of the rack (STEP 9).
• Check tightness of all bolts
and knobs periodically
(every 6 months).
• Check rubber straps for wear
and replace if worn.
• Install on a trailer or other towed
vehicle.
• Put more than 2 bikes on a class
1 hitch.
• Do not “overstretch” the straps.
• Use the rack while traveling on dirt
roads.
• Use the rack to carry tandems or
recumbents.
• Put more than the intended number
of bikes on the rack.
