background image

1.800.661.4661

View demonstration videos and a 

complete product list at

 

tigertool.com

Technical Support

• 

 

   Stay  Alert!   Watch what you are doing and use common sense when 

operating this tool.

    Inspect product for damage prior to using, do not use if product is  

in unsafe condition.

     Do not operate tool while under the influence of drugs, alcohol,  

or medication.

    Always use safety equipment to prevent injuries. Approved face and 

eye protection must always be worn by the operator, as well as others 
in the work area.

• 

   Do not overreach, keep proper footing and balance at all times.

•  

  Dress properly. Do not wear loose clothing or jewelry.  

Keep your hair, clothing and gloves away from moving parts.

    Keep hands clear of all pressurized hydraulic components.

•  

  Always ensure hoses are free from sharp bends and kinks.

• 

  Keep your work area clean and well lit.

 

CAUTION:

  

KEEP HYDRAULIC COUPLER PROTECTED WHEN NOT IN USE. DUST CAPS SHOULD BE USED ON COUPLERS WHEN NOT IN USE TO 

AVOID CONTAMINANTS FROM ENTERING THE HYDRAULIC CYLINDER AND POWER SOURCE. THIS PRACTICE WILL HELP TO EXTEND THE LIFE OF 
THIS PRODUCT AND ENSURE CONTINUED CONSISTENT OPERATION.

Safety Warning 

Read all instructions and safety warnings prior to operation. Failure to do so could result in 

equipment damage, personal injury, or even death.

Have What It Takes

Peterbilt Air Trac Pin  

& Bushing Adapter

15012

Summary of Contents for 15012

Page 1: ...ess properly Do not wear loose clothing or jewelry Keep your hair clothing and gloves away from moving parts Keep hands clear of all pressurized hydraulic components Always ensure hoses are free from sharp bends and kinks Keep your work area clean and well lit CAUTION KEEP HYDRAULIC COUPLER PROTECTED WHEN NOT IN USE DUST CAPS SHOULD BE USED ON COUPLERS WHEN NOT IN USE TO AVOID CONTAMINANTS FROM EN...

Page 2: ...he bushing and install one 15001 125 threaded pin hand tighten with the provided socket driver 5 Insert the 15001 3 pull bar through the 15001 126 pull adapter Place the pull adapter pull bar over the other end of the bushing and install the remaining 15001 125 threaded pin 6 Slide the hydraulic cylinder cylinder adapter spacer tube face plate over the pull bar assembly and thread on the 15001 7 t...

Page 3: ...shing and install the remaining 15001 125 threaded pin 5 Insert the pull bar and bushing assembly through the eye of the torque rod threaded end of the pull bar first until the bushing is up against the torque rod in the desired orientation 6 Place the hydraulic cylinder cylinder adapter face plate over the pull bar and thread on the 15001 7 trigon nut hand tighten 7 Connect your 10 000psi hydraul...

Page 4: ...ull Adapter Magnets Parts Breakdown 1 800 661 4661 View demonstration videos and a complete product list at tigertool com Technical Support Have What It Takes Peterbilt Air Trac Pin Bushing Adapter 15012 15001 57 15001 55 15001 79 15001 125 15030 1 15001 112 15001 126 15001 9 15001 57 15001 9 15001 79 15001 55 15030 1 15001 125 15001 112 15001 126 ...

Reviews: