background image

USER GUIDE

PRODUCT INFORMATION

File: TISPLUS 

Cradle 

for 

Zebra T

C5

1/56 

Stand: 

16.01.2018

 1 

© TIS GmbH 2018  – Subject to changes and amendments, errors excepted        Müller-Armack-Str. 8 | 46397 Bocholt | www.tis-gmbh.com | 

contact@tis-gmbh.com

 | +49 2871 2722-0

TISPLUS SCAN HANDLE FOR HONEYWELL DOLPHIN CT50

1. 

Monting Information ..................................................................2

2. 

Connection cable .......................................................................3 

3. 

Mounting the TISPLUS Cradle ......................................................3 

4. 

Power LED ...............................................................................4 

5. 

Using TC51/56 without Rubber Boot ............................................5 

6. 

Handling ...................................................................................5

7. 

Maintenance/Care ......................................................................6

8. 

Technical Data ...........................................................................6 

Content

TISPLUS VEHICLE CRADLE FOR ZEBRA TC51/56

USER GUIDE

PRODUCT INFORMATION

 1 

© TIS GmbH 2018 – Subject to changes and amendments, errors excepted                   Müller-Armack-Str. 8 | 46397 Bocholt | www.tis-gmbh.com | contact@tis-gmbh.com | +49 2871 2722-0

USER GUIDE

ZEBRA TC51/56 VEHICLE CRADLE

Summary of Contents for TISPLUS







Reviews: