background image

Packing List:

• Reading table top

• Bottom panel

• 2 Side panels, left and right

• Front/speaker panel

• Black speaker grille(S-250)

• Hand-held mic (S-250)

• Mic cable (S-250)

• Gooseneck w/mic holder (S-250)

• Amplifier (S-250)

Easy Step-By-Step Instructions

Featuring Quickfit-Expando-6 Connectors 

for W/S-250 Tabletop Lectern Assembly

The Tabletop Lectern is designed

for easy assembly. If you have any

questions about assembling or using

your new sound system, or if you

want more information about acces-

sories, call AmpliVox’s customer 

service line.

The lectern is carefully packed 

to minimize shipping damage. If

your unit was damaged in shipping

call our toll-free customer service

line or visit our web site at 

http://www.ampli.com

1-800-267-5486

Reading

Table Top Panel

Bottom

Left Side

Right Side

How the Quickfit-Expando-6

Connectors work. 

Do not over tighten the connectors

.

They will break if turned too far. Turn

only 1/2 turn clockwise to lock. The

steel Quickfit-6 expanding dowels and

the Quickfit-Expando-6-Connectors lock

together for easy assembly.  

3. Inspect the Pre-installed

Quickfit Expando-6 Connectors.

Check the Top, Speaker/Front, Left and

Right Side Panels to insure that the flat

edge on  the connector is facing the

outer edge of the board. Use a phillips

screwdriver to rotate them, if needed.

Untightened

(unlocked)

To tighten 

(to lock)

Edge of board

Edge of board

To untighten 

(to unlock)

Tightened

(locked)

1. Unpack all the pieces.

Be

sure to save the packing and the box

in case you need to return the lectern

for any reason. Check that you have

all the pieces and that they are not

damaged.

2. Insert the dowel pins.

With your

thumb(or use phillips screwdriver to

ease insertion), push the dowel pins

into the holes in the 2 sides and the

top. Make sure the plastic collar is

flush with the wood surface.

Speaker/

Front

Panel

F:\docs\productinstructions\r-250assembly.qxd

Quickfit-6 Expanding Dowel Pin

Hardware:

•12 Quickfit-Expando-6 Connectors 

pre-installed

•12 Push-in Quickfit-6 Expanding dowels

Tools Needed:

•Phillips Screwdriver - for 1/2 turn of pre-

inserted Quickfit-Expando-6 Connectors

The Titus fittings supplied with this

kit have been specially designed

for ease of assembly

Turn counterclockwise to unlock

Reviews: