background image

 

Quick Start User Guide for  

Alientech Powergate 3 Tuning Tool 

CHECK LIST:  

X1 Power Gate 3 Unit

X1 Mini USB Lead

X1 Data OBD Connector

CONNECTING WITH PC: 

1. Plug the mini USB lead provided with your unit into the PC and wait for your PC 

to install the drivers.

2. Install the program send to you by email if you haven't received this please 

contact us by email "info@tmcmotorsport.com".

3. Once the programmed has installed please open it and it will connect with the 

tool and do any relevant updates.

4. The unit will now be updated and ready to use can you can now unplug it from 

the PC.

CONNECTING WITH YOUR VEHICLE: 

1. Ensure OBD lead is plugged in securely to the Powergate Unit, now take it to 

the vehicle.

2. Ensure the Vehicle is connected to a good battery charger if your battery isn’t 

good.

3. Plug the OBD connector on the lead into the OBD port in your car (This can be 

in various places depending on the vehicle) and switch on the ignition.

4. It is good practice to ensure there are no fault codes in the system before you 

start the procedure in case there are any underlying issues with the vehicle. So 
tap the diagnostic icon then on the correct vehicle & then the forward arrow to 
continue. It will then give you instructions to follow on the screen.  Make a 
note of any stored codes or faults and clear the codes.

Reviews: