Programing Instructions
Model: V160ELPLUUS15 and V160ELPLUUS514
Before starting, be sure you assemble the door lock correctly.
Step # 1
Reset
→
Remove one of the batteries.
→
Press and hold
while inserting the battery and hold until the long beeps stop.
→
Press + + + + + to configurate the opening direction.
Step # 2 with deadbolt unlocked.
Delete All User Code
→
Press the
for one (1) second until you hear a beep and the red light appear.
→
+ + + + + - Programing Code (PC) Number
→
→
+
→
→
Let the red light disappear.
Step # 3 with deadbolt unlocked.
Add New User Code
→
Press the
for one (1) second until you hear a beep and the red light appear.
→
+ + + + + - Programing Code (PC) Number
→
→
+
→
→
Enter the new four (4) to ten (10) digit user code (UC) number.
→
→
Let the red light disappear.
Step # 4 with deadbolt unlocked.
Enable or Disable the Auto-Lock
→
Press the
for one (1) second until you hear a beep and the red light appear.
→
+ + + + + - Programing Code (PC) Number
→
→
+
→
→
(
ON
)
→
→
Let the red light disappear.
→
Or
→
(
OFF
)
→
→
Let the red light disappear.
Step # 5 with deadbolt unlocked.
Customize the Auto-Lock Timer
→
Press the
for one (1) second, until you hear a beep and the red light appear.
→
+ + + + + - Programing Code (PC) Number
→
→
+
→
→
Enter numbers from + to + in order to configurated seconds
between ten (10) to ninety nine (99).
→
→
Let the red light disappear.
