Programing Instructions
Model: V190EJAUS15
Before starting, be sure you assemble the door lock correctly.
Step # 1
Reset
→
Press the
button for five (5) seconds until you hear three (3) beeps.
Step # 2 with deadbolt unlocked.
Delete All User Code
→
+ + + - Programming Code (PC) Number
→
→
→
Step # 3 with deadbolt unlocked.
Add New User Code
→
+ + + - Programming Code (PC) Number
→
→
→
→
Enter the new four (4) to ten (10) digit user code (UC) number.
→
Step # 4 with deadbolt unlocked.
Enable or Disable the Auto-Lock
→
+ + + - Programming Code (PC) Number
→
→
→
Step # 5 with deadbolt unlocked.
Customize the Auto-Lock Timer
→
+ + + - Programming Code (PC) Number
→
→
→
→
Enter numbers from + to + in order to configurated seconds
between ten (10) to ninety nine (99).
→
Step # 6 with deadbolt unlocked.
Add Remotes
→
+ + + - Programming Code (PC) Number
→
→
+
→
→
Press any button on the remotes for eight (8) seconds. (Up to five (5) remotes)
→
Step # 7 with deadbolt unlocked.
Delete All Remotes
→
+ + + - Programming Code (PC) Number
→
→
+
→
