Form No. 3365-651 Rev A
Fuel Pump Relocation Kit
Greensmaster
®
3150 2-Wheel Drive Traction Unit
Model No. 119-4121
Model No. 119-4123
Installation Instructions
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Qty.
Use
Fuel pump (for kit 119–4123 only)
1
Pump mounting bracket
1
Flange screw
2
Hose (15 inches)
1
Hose (23 inches)
1
Hose (42 inches)
1
Install the New Fuel Pump
Installing the New Fuel Pump
DANGER
In certain conditions, gasoline is extremely
flammable and highly explosive. A fire or explosion
from gasoline can burn you and others and can
damage property.
•
Never smoke when handling gasoline, and stay
away from an open flame or where gasoline
fumes may be ignited by a spark.
•
Perform this procedure when the engine is cold
and in a well ventilated area.
•
Wipe up any gasoline that spills.
WARNING
Gasoline is harmful or fatal if swallowed. Long-term
exposure to vapors can cause serious injury and
illness.
•
Avoid prolonged breathing of vapors.
•
Keep face away from nozzle and gas tank or
conditioner opening.
•
Keep gas away from eyes and skin.
1. Allow the engine to completely cool down.
2. Remove the air cleaner cover and the air cleaner
from the engine (Figure 1).
G014024
2
1
Figure 1
1.
Air cleaner cover
2.
Old fuel pump location
3. Remove the 5 existing bolts holding the air cleaner
body to the carburetor (Figure 2).
1
G014039
Figure 2
1.
Remove existing bolts
© 2010—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA.
All Rights Reserved
Summary of Contents for 119-4121
Page 4: ......
