Form No. 3435-911 Rev A
Front Weight Kit
Zero-Turn-Radius Riding Mower
Model No. 140-2050
Installation Instructions
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Prepare the machine.
2
No parts required
–
Remove the guards (machines equipped
with MyRide only).
Bolt (3/8 x 1 inch)
4
Locknut (3/8 inch)
6
Left weight-mounting bracket
1
Right weight-mounting bracket
1
Washer
2
Bolt (5/8 x 2-3/4 inches)
2
3
Suitcase weight
8
Install the weights.
4
No parts required
–
Install the guards (machines equipped
with MyRide only).
1
Preparing the Machine
No Parts Required
Procedure
1.
Park the machine on a level surface.
2.
Disengage the blade-control switch.
3.
Move the motion-control levers outward to the
NEUTRAL
-
LOCK
position to engage the parking
brake.
4.
Shut off the engine and remove the key.
© 2019—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3435-911* A
Summary of Contents for 140-2050
Page 4: ......
