Toro 38828 Power Max HD 1128 OXE Operator'S Manual Download

Page: 1 / 32

Form No. 3373-868 Rev B

Power Max Heavy Duty 1128 OXE Snowthrower

Model No. 38828—Serial No. 313000001 and Up

Operator's Manual

Introduction

This machine is intended to be used by residential
homeowners or professional, hired operators. It is
designed primarily for removing snow from paved
surfaces, such as driveways and sidewalks, and other
surfaces for traffic on residential or commercial
properties. It is not designed for removing materials
other than snow, nor is a model with a pivoting scraper
designed for clearing off gravel surfaces.

Read this information carefully to learn how to operate and
maintain your machine properly and to avoid injury and
machine damage. You are responsible for operating the
machine properly and safely.

You may contact Toro directly at www.Toro.com for machine
and accessory information, help finding a dealer, or to register
your machine.

Whenever you need service, genuine Toro parts, or additional
information, contact an Authorized Service Dealer or Toro
Customer Service and have the model and serial numbers of
your machine ready. Figure 1 identifies the location of the
model and serial numbers on the machine. Write the numbers
in the space provided.

Figure 1

Model and serial number location

Model No.

Serial No.

This manual identifies potential hazards and has safety
messages identified by the safety alert symbol (Figure 2),

which signals a hazard that may cause serious injury or death
if you do not follow the recommended precautions.

Figure 2

Safety alert symbol

This manual uses 2 words to highlight information.

Important

calls attention to special mechanical information

and

Note

emphasizes general information worthy of special

attention.

Replacement Engine Owner’s Manuals may be ordered
through the engine manufacturer.

Contents

Introduction .................................................................. 1

Training ................................................................. 3
Preparation............................................................. 3
Operation............................................................... 3
Maintenance and Storage.......................................... 4
Toro Snowthrower Safety ......................................... 4
Sound Pressure ....................................................... 4
Sound Power .......................................................... 4
Vibration................................................................ 4
Safety and Instructional Decals ................................. 4

Setup ............................................................................ 7

1 Installing the Upper Handle.................................... 7
2 Installing the Wheel Clutch Cable Ends .................... 8
3 Installing the Traction Control Linkage .................... 9
4 Installing the Chute Control Rod ............................10
5 Connecting the Wire to the Headlight......................11
6 Filling the Engine with Oil.....................................11
7 Checking the Tire Pressure ....................................12
8 Checking the Skids ...............................................12
9 Checking the Traction Drive Operation ...................12

Product Overview .........................................................13
Operation ....................................................................14

Filling the Fuel Tank ...............................................14
Starting the Engine .................................................14
Stopping the Engine ...............................................16
Operating the Traction Drive ...................................16
Using the Wheel Clutch Levers.................................17
Operating the Speed Selector ...................................17
Operating the Auger/Impeller Drive.........................17

Original Instructions (EN)

Printed in the USA

*3373-868* B