background image

38

DVD video player / Outputs / Supplied accessories

DVD video player

Power supply

230~240 V AC, 50 Hz

Power consumption

Operation: 12 W

Standby: 3 W

Mass

2.0 kg

External dimensions

Width: 430 mm

Height: 59 mm

Depth: 206 mm

Signal system

PAL, NTSC

Laser

Semiconductor laser, wavelength 650/780 nm

Frequency response

DVD:  4 Hz - 22 kHz
CD: 4 Hz - 20 kHz

Harmonic distortion

0.008 %

Wow and flutter

Below measurable level

Operating conditions

Temperature: 5 °C to 40 °C, Operation status: Horizontal

Outputs

Video output

1.0 V (p-p), 75 

, negative sync., pin socket x 1

Component video output

(Y) 1.0 V (p-p), 75 

, pin socket x 1

(P

B

)/(P

R

) 0.7 V (p-p), 75 

, negative sync., pin sockets x 2

Audio output (ANALOG)

–12 dBm, 1 k 

, pin sockets (L, R) x 1

Audio/Video output (SCART)

Audio: –12 dBm, 1 k 

Ω,

 Video: 1.0 V (p-p), 75 

RGB: 0.7 V (p-p), 75  , SCAR T socket x 1

Audio output (DIGITAL OPTICAL)

Optical connector x 1

Supplied accessories

Remote control ..................................................... 1

Batteries (R03/AAA) ............................................. 2

• Designs and specifications are subject to change without notice.

Specifications

Others

04/03 U

DVD-VIDEOSPIELER

DVD VIDEO PLAYER

SD-190ESE

DIGITAL VIDEO

©2004 Toshiba Corporation
Bevor Sie das Gerät in Betrieb nehmen, lesen Sie bitte diese Bedienungsanleitung.
Before operating the unit, please read this manual thoroughly.

DEUTSCH (D)

ENGLISH (E)

BEDIENUNGSANLEITUNG

OWNER’S MANUAL

2

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT
INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO
QUALIFIED PERSONNEL ONLY.

CAUTION:

This Digital Video Disc Player employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and retain for
future reference. Should the unit require maintenance, contact an authorized service location
-see service procedure.

Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try to open the enclosure.
Visible and invisible laser radiation when open and interlocks defeated.
DO NOT STARE INTO BEAM.

CAUTION:

Servicing instructions are for use by qualified service personnel only. To reduce the risk of
electric shock do not perform any servicing other than that contained in the operating
instructions unless you are qualified to do so.

In the spaces provided below, record the Model and Serial No. located on the rear panel of your DVD video
player.

Model No.

Serial No.

Retain this information for future reference.

Location of the required label

The rating plate and the safety caution are on the rear of the unit.

CLASS 1
LASER PRODUCT

SAFETY PRECAUTIONS

3

E

SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT

This equipment has been designed and manufactured to meet international safety standards but, like any electrical
equipment, care must be taken if you are to obtain the best results and safety is to be assured.

**************

DO read the operating instructions before you attempt to use the equipment.
DO ensure that all electrical connections (including the mains plug, extension leads and inter- connections between
the pieces of equipment) are properly made and in accordance with the manufacturer’s instructions. Switch off and
withdraw the mains plug before making or changing connections.
DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.
DO be careful with glass panels or doors on equipment.

**************

DON’T remove any fixed cover as this may expose dangerous voltages.
DON’T obstruct the ventilation openings of the equipment with items such as newspapers, tablecloths, curtains, etc.
Overheating will cause damage and shorten the life of the equipment.
DON’T allow electrical equipment to be exposed to dripping or splashing, or objects filled with liquids, such as vases,
to be placed on the equipment.
DON’T place hot objects or naked flame sources such as lighted candles or nightlights on, or close to equipment.
High temperatures can melt plastic and lead to fires.
DON’T  use  makeshift  stands  and  NEVER  fix  legs  with  wood  screws  -  to  ensure  complete  safety  always  fit  the
manufacturer’s approved stand or legs with the fixings provided according to the instructions.
DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic
safety. It is illegal to watch television whilst driving.
DON’T listen to headphones at high volume, as such use can permanently damage your hearing.
DON’T  leave  equipment  switched  on  when  it  is  unattended  unless  it  is  specifically  stated  that  it  is  designed  for
unattended operation or has a stand-by mode. Switch off using the switch on the equipment and make sure that your
family know how to do this. Special arrangements may need to be made for infirm or handicapped people.
DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any
way -switch off, withdraw the mains plug and consult your dealer.

ABOVE ALL
—NEVER let anyone especially children push anything into holes, slots or any other opening in the case -
this could result in a fatal electrical shock;

—NEVER guess or take chances with electrical equipment of any kind
—it is better to be safe than sorry!

*************

EXCLUSION CLAUSE

Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:
i)

fire;

ii)

earthquake;

iii)

accidental damage;

iv)

intentional misuse of the product;

v)

use of the product in improper conditions;

vi)

loss and/or damage caused to the product whilst in the possession of a third party;

vii)

any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out
in the owner’s manual;

viii) any loss or damage caused directly as a result of misuse or malfunction of the product when used simulta-

neously with associated equipment;

Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including
but not limited to the following, loss of profit, interruption of business, the loss of recorded data whether caused
during normal operation or misuse of the product.

Summary of Contents for SD-190ESE











Reviews: