TOSO Mytec 01 Instruction Manual Download

Page: 1 / 8

No. R − 1 2 0 0 1 9 E

First edition

Instruction Manual

INDEX

■

Caution

・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・

■

Product View and Part Names

・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・

■

Installation and Detaching

・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・

■

How to Operate

・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・

■

How to Use a Stop Controller (Optional)/Mytec 01 Only

・・・・・・・・・・・・・

■

How to Adjust the Screen Operation Force and the Ascent Speed

・・・・・・

■

Fixing Improper Rolled up Screen

・・・・・・・・・・・・・・・・・・・・・・・・・

■

Troubleshooting

・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・

■

Cleaning

・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・

Roller Blind

Mytec 01 Loop/Mytec 01

Thank you for purchasing TOSO products. To ensure safe use of this product,
please read the following thoroughly and keep this manual stored.

Guide for Distributors and Installation Contractors

This manual contains information for a user to safely operate this product.
Please provide this manual to a customer.

Summary of Contents for Mytec 01









Search results

Summary of Contents for Mytec 01

Reviews:

Related manuals for Mytec 01

Brands by name

Popular brands

TOSO Mytec 01, Instruction Manual

Search results

Summary of Contents for Mytec 01

Reviews:

Related manuals for Mytec 01

Brands by name

Popular brands