townew T1, User Manual

Part Name

Pb

Hg

Cd

Cr(VI)

PBB

PBDE

Harmful Substances

Circuit components

The shell

Transmission wheel, 

fan blade structural parts

Harmful substances and contents in products

Warranty Regulations

1.We provide 1-year warranty for the main body
2.Warranty documents for details at our website:ww-
w.townew.com
3.We do not replace or refund any sold product except for 
quality problem.

Disclaimers

Weibo

WeChat

townew

Address: C-213,1#, No.899 Dan Gui Road | Shanghai | China
Web:www.townew.com
Tel: 400-821-6632

Man-made surface corruption,break,distortion,or damages 
due to improper installation,operation,and maintenance.
The warranty period has expired.
Product repaired by unauthorized service provider or person-
nel,or disassembled by users themselves.
The consumable,such as the box of garbage bags are not 
covered by warranty.

This warranty does not cover the following cases:

1.

2.
3.

4.

—— We reserve all the right for the final explanation.——

Kindly Reminders

Warning

* Please do not put excessive garbage, for avoiding improper       
packing
* Please do not open the cover when the product is packing, for 
avoiding scald.

* If the product will not be used for a long time, please turn off 

the power after fully charged
* The machines contain lead-acid batteries. At the end of their 
lives , please handed over the batteries to the recycling drop 
points or professional recycling organizations

Do not use unofficial batteries and chargers for charging purpose.
Do not dismantle, repair, refit the product and replace the batteries 

by yourself.
Do not expose the product to high temperature conditions or wash 
it by water

Do not throw flame, alcohol, gasoline, gunpowder and other 
volatile, flammable and combustible articles into it.

Common Trouble Shooting

Automatic sensor failure

Manually close the cover during open-cover mode – then touch the 
button, and automatic sensor can be restored after the "Di" sound.

1.

Touch button failure

Touch the button when opening the power – restart the bin 5 seconds 
later.

2.

Packing system failure

The previous packing stick did not return to its initial position - long press 
the touch button to reset it, and then long press the button again for 
restarting
Excessive rubbish in the garbage can, which exceeding the height of the 
packing system - compact or remove a part of rubbish and repackaging 
it.

3.

Cutting bags failure

Water or garbage is stuck at the sealing bag mechanism - manually pull 
out part of the garbage bag and repack it.

4.

Bag changing failure

Infrared ray in the bottom of the garbage can is covered by water or dirt 
– clean them out from the garbage can.

5.

Directions for use

First use

Step 1: open the power switch on the back and press the button “I”;
Step 2: long press the button on the front until hearing the “Di” sound 

twice,then it can work normally，then all function is available.

Automatic induction mode

Access to the sensor within 35 cm from above, then the cover will be 
opened automatically. After removing, LED lights gradually fade and turn 

off automatically.

1.

2.

The open-cover mode

Touch the button and the mode will be activated after ‘Di’ sound. Press it 
again for closing the cover and restore the automatic induction. Under the 

open-cover mode, the light and the induction are off.

3.

Automatic packing system

Long press the button, after twice ‘Di’ sounds, the garbage can will be 
automatically packed. When the packing is completed, the cover will open 
and the packaged garbage bag can be taken out.

4.

Charge

When there is a continuous “Di” sound and the light bar is flashing, it 

means it's low power. The power should be turned on during 10 hours 

charging time. Meanwhile, the light bar is keeping continuous flashing. 
The light will turn off when the charging completed.

5.

6. Replace the box of garbage bags

1. Turn off the power

2. Open the cover

3.  Remove the packing gland

4. Take out the old box 

    and put in the new

5. Cover the  gland 6. Turn on the power

Product Introduction

The Basic Parameters

Name

G.W
N.W

Carton Size

Product Size

Battery

Power Adapter

Charge Time

Operative Norm

Parameters

4kg

3.5kg

293x343x453mm
240x310x402mm

12V 2.2AH

13.8V 0.65A

10h

GB4706.1

Power switch

Charging jack

Cover

Packing gland

Box of garbage bags

Infrared sensor

Touch key

Power adapter

TOWNEW T1 Manual

O:  The percentage of this harmful objects which is inside of all homoge

-

neous materials of the component is lower than the GB/T 26572-2011 

limitedly specified requirement.
X：The percentage of this harmful objects which is at least inside one of 

homogeneous materials of the component is higher than the GB/T 

26572-2011 limitedly specified requirement.