Method ONE: Via TP-Link Tether App
1. Download the Tether app.
Scan for Tether
Tether
or
Method TWO: Via a Web Browser
The default wireless network names (SSIDs) and password are
printed on the label at the bottom of the router.
1. Connect your device to the router wirelessly
or with an Ethernet cable.
2. Launch a web browser, and enter
http://tplinkwifi.net or http://192.168.0.1 in
the address bar. Create a password to log in.
3. Follow the step-by-step instructions to
set up the internet connection and
register for the TP-Link Cloud service.
Note: If the login window does not appear, please refer to
Q2
of
Need
Help?
in this guide.
http://tplinkwifi.net
Let’s Get Started
Confirm Password
Password
2. Open the Tether app and log in with your
TP-Link ID.
Note: If you don’t have an account, create one first.
3. Tap the button in the Tether app and
select Gaming router > Archer GX90.
Follow the steps to complete the setup
and connect to the internet.
Choose your device type
Router
Range Extender
Archer AX6000
Set up with videos:
Scan QR code or visit
https://www.tp-link.com/suppo
rt/setup-video/#wi-fi-routers
If your internet connection is through an Ethernet cable directly from the wall instead of through a DSL /
Cable / Satellite modem, connect the Ethernet cable to the router’s
2.5 Gbps WAN/LAN
port, and then
follow steps 3 and 4 to complete the hardware connection.
*Image may differ from actual product.
Connect the Hardware
1
Unplug the power
to turn off your modem, if any,
and remove the backup battery if it has one.
Modem
Unplug the power
Hold the antennas from the base and
push them fully into the slots.
Internet
Connect the
powered-off
modem
to the router’s
2.5 Gbps WAN/LAN
port with an Ethernet cable.
1
Power on the modem, and then wait about
2 minutes
for it to restart.
2
Connect the power adapter
to the router and turn it on.
3
SSID:TP-Link_XXXX
SSID:TP-Link_XXXX_5G
SSID:TP-Link_XXXX_5G_Gaming
Wireless Password/PIN: XXXXXXXX
Verify the LED on the top is solid on (red or white) before moving on.
4
Note: If you want to use the 1 Gbps WAN/LAN port
as the WAN port instead, please refer to
Q1
of
Need
Help?
in this guide.
Configure the Router
