![background image](http://html1.mh-extra.com/html/tp-link/vigi/vigi_quick-start-manual_1144842001.webp)
3. Secure the Camera
Route the cable through the side outlet. Insert anchors into the holes,
use screws to affix the camera base, and attach the camera to it.
Appearance
*The camera’s standard power supply is 12V DC or PoE (802.3af/at). The
power source should meet LPS, PS2, and other requirements according to IEC
62368-1.
Camera Base
Side Outlet
Lens
IR LED
1
2
Camera Body
3
Camera
4
Power Supply Interface
(12V DC) *
8
6
RJ45 10/100M
Self-Adaptive Ethernet
Port (supports PoE) *
7
5
2
3
1
4
5
7
8
6
3. Secure the Camera
Route the cable through the wall/ceiling. Insert anchors into the holes,
use screws to affix the camera base, and attach the camera to it.
Stick the mounting template to the desired mounting place. Drill
3 screw holes and 1 cable hole according to the template.
1. Drill Holes
2. Open the Camera Case
Align the notch of the camera body with any score on the camera
base, and use a screwdriver to gently pry open the camera case.
Quick Start Guide
Option 1: Cable through the wall/ceiling
Stick the mounting template to the desired mounting place. Drill
3 screw holes according to the template.
1. Drill Holes
2. Open the Camera Case
Align the notch of the camera body with any score on the camera
base, and use a screwdriver to gently pry open the camera case.
Option 2: Cable through the side outlet
1
Wall/Ceiling Mounting
4. Adjust the Surveillance Angle
Adjust the surveillance angle as needed. Make sure the lens is
positioned above the IR LED for normal viewing.
4. Adjust the Surveillance Angle
Adjust the surveillance angle as needed. Make sure the lens is
positioned above the IR LED for normal viewing.
Cable Hole
(For the cable through wall/ceiling)
Score of
camera base
Notch of
camera body
Score of
bottom case
Notch of
Score of
camera base
Notch of
camera body
Score of
bottom case
Notch of
Side Outlet
*Images may differ from actual products.
Tilt: 0° to 85°
Pan: 0° to 360°
Rotate: 0° to 360°
Mounting Template
Anchors & Screws
Network Camera
Quick Start Guide
Quick
Start
Guide
Tilt: 0° to 85°
Pan: 0° to 360°
Rotate: 0° to 360°