Replacement inner flap
TPI air inlet valves
1450-series
2.
2
3
4
1
Exercise caution when unscrewing the old innerflap! The spring unit is located
underneath the left side of the flap. If that side is unscrewed and the flap
pulled up, the spring will jump back. This may injure your fingers! Wear safety
glasses during replacement!
Mounting instructions
1.
Start with the right side of the innerflap. Simply slide the flap into the frame. Do
not forget the plastic washer, also shown in picture 3.
Pull up the flap on the left side. Place the plastic washer as shown in picture 3.
Then replace the black bracket and place the transparent plastic strip over the
spring as shown in picture 4.
