DualID II User Guide
Using RFID card
1. Present card in front of reader
2. A beep signal indicates correct reading of the
card
3. Green light in LED3 indicates authorized ID
4. Begin operation.
1
2
3
LED
Info
• LED1 indicates that the unit is powered
• Cancel key input with and start again
• Red LED3 indicates that the input is canceled
• Wait 10 seconds before commencing new pin input
• Don’t use RFID card and pin code simultaneously
• LED2 is not in use
Keypad and RFID card
reader
LED
Color
Yellow
1
3
3
Green
Red
Meaning
Power on
Approved ID
Canceled ID
trackunit.com/support
support@trackunit.com
Using key pad
1. Type pin code
2. Confirm with
3. Green light in LED3 indicates authorized ID
4. Begin operation.
7006
.1101 V3
