IRON HOLDER
TIP RETAINER NUT
CLEANING SPONGE
CHISEL TIP
TIP RETAINER
CALIBRATION ADJUSTMENT
SECURITY KEY
PENCIL TIP
TEMPERATURE CONTROLS
DIGITAL DISPLAY
RETAINING NUT
CORD
RECEPTACLE
™
For best results read the entire manual before operating.
TK955 Digital
Soldering Station
Packing List
●
TK-955 Soldering Station
●
Iron Holder with Sponge
●
Soldering Iron with Tip
●
2 Security Keys
●
Pencil Tip
Precautions
CAUTION:
When the power is on, the tip temperature is between 200°C / 400°F and 480° C / 899°F. Since
mishandling may lead to burns or fi re, be sure to comply with the following precautions:
•
Do not touch the metallic parts while operating.
•
Always store the iron in the holder when not in use.
•
Do not use the product near fl ammable items.
•
Advise other people in the work area that the unit can reach a very high temperature and should be considered
potentially dangerous.
•
Turn the power off while taking breaks and when you are fi nished using it.
•
Before replacing parts or storing the unit, turn the power off and allow the unit to cool to room temperature.
To prevent damage to the unit and ensure a safe working environment, be sure to comply with the following precautions:
•
Do not use the unit for applications other than soldering.
•
Do not hit the soldering iron against the work bench or other objects to shake off residual solder.
•
Do not modify the unit.
•
Use only genuine replacement parts.
•
Do not bend or damage the security key. Should the key become bent, do not force it into the station.
•
Do not allow the unit to become wet or use the unit when your hands are wet.
•
The soldering process will produce smoke. Make sure the area is well ventilated.
