1
November 3, 2017
November 2017 | TreadwayHouse Designs | 480-323-9009
Setting time and Date on your new Nixie Clock
Nixie Clock Users Manual
V49R2
9V-12V Input
On/ Off switch
Selection
Pushbutton
Your clock has been set at the factory to match your specific time zone, however, . If you want to adjust the
time and date please follow the procedure below:
•
Press the selection pushbutton on the back of your clock for 1- 2 seconds. The clock
background LEDs will blink with one pulse. The Hours digit will be illuminated
1
.
Quick press the
selection button for less than one second to advance the digit
•
Press the selection pushbutton again on the back of your clock for 1- 2 seconds. The clock
background LEDs will blink with two pulses and the Hours digit now will be illuminated
1
. Quick
press the selection button for less than one second to advance the digit
