TEW-434APB Wireless PoE Access Point is today’s link to
Wireless Technology. Compliant with the IEEE Wireless
Networking Standard 802.11g, it provides Direct Sequence
Spread Spectrum (DSSS) operation for transparent bridging and
roaming capabilities for wireless nodes. The TEW-434APB also
provides WDS bridging functions, allowing users to connect two or
more Access Points together, wirelessly. With this Wireless
Access Point and Wireless Network Adapters, users can connect
to Ethernet/Fast Ethernet LAN at home or office to access network
resources with coverage up to 300 meters.
TEW-434APB
54Mbps 802.11g Wireless PoE Access Point
TEW-434APB
rev:02.06.2007
• Operates as Access Point, AP Client, WDS Wireless Bridging, or Repeater modes
• Power over Ethernet (PoE) IEEE 802.3af support
• Provides Security with 64/128-Bit WEP, WPA/WPA2 and WPA-PSK/WPA2-PSK
• WDS Security supports 64/128-Bit WEP, WPA-PSK/WPS2-PSK
• Supports 802.1x Authentication and MAC Address Control for Authorization Access (20 entries)
• Allow users to Disable ESSID Broadcast to Increase Wireless Security
• Built-in 10/100Mbps Auto-Sensing Fast Ethernet PoE Port
• Dynamic Data Rate Scaling at 54, 48, 36, 24, 18, 12, 9 and 6 Mbps for 802.11g
• Dynamic Data Rate Scaling at 11, 5.5, 2 and 1 Mbps for 802.11b
• Allow Auto Fallback Data Rate for Optimized Reliability, Throughput and Transmission Range
• 2dBi Detachable Diversity Antenna. Replace with Optional High-Gain Antenna to Extend the Range/Coverage Area.
• Easy Configuration and Maintenance with Web Browser (HTTP)
• Flash Memory for Firmware Upgrade and Save/Restore Settings
• Supports Most Operating Systems, such as Windows 95/98/ME/NT/2000/XP, Unix and Mac
• Distance coverage 50 to100 meters indoor, 100 to 300 meters outdoor depending on the environment
• 3-Year Warranty
FEATURES
