TEW-638PAP
rev:02.05.2010
The 300Mbps Wireless N PoE Access Point (model TEW-638PAP) is a
scalable secure high speed solution that provides up to 12x the speed
and 4x the coverage of wireless g.
No need to install this access point near a power source, power and
data are received through a single Ethernet cable using Power over
Ethernet (PoE) technology.
Connect wireless clients to your network at the touch of a button with
WPS technology. Features Access Point Client mode, Wireless
Distribution System (WDS) support, and detachable antennas. Multiple
Input Multiple Output (MIMO) antenna technology increases wireless
coverage, advanced encryption protects your wireless network, and
Wireless Multimedia (WMM) Quality of Service technology prioritizes
audio and video traffic.
TEW-638PAP
(V1.0R)
300Mbps Wireless N PoE Access Point
internet
cameras
wireless
FEATURES
• IEEE 802.3af Power over Ethernet (PoE) compliant device (power adapter included for non-PoE installations)
• Compliant with wireless IEEE 802.11n/g/b standards
• Up to a 300Mbps data rate using an 802.11n connection
• Works as a wireless adapter with AP Client support
• Expand a wireless network using Wireless Distribution System (WDS)
• 802.11e Wi-Fi Multimedia (WMM) QoS data prioritization
• Low interference and high susceptibility deliver reliable performance
• 2 detachable antennas and MIMO antenna technology provide high speed performance and expansive coverage
• Wi-Fi Protected Setup (WPS) integrates other WPS devices into your network quickly
• On/off power switch
• Advanced wireless encryption: 64/128-bit WEP, WPA/WPA2-RADIUS, and WPA/WPA2-PSK
• Coverage up to 100 meters (328ft.) indoor and 300 meters (984ft.) outdoor*
• 3-year limited warranty
