background image

 

 

 

PC26-AMEII / PC40-AME 

USER MANUAL 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

PORTABLE AIR-CONDITIONER 

 

1

 

 

 

1. 

"

 

PLEASE MAKE SURE THE PRODUCT VENTILATES ALL THE TIME "! 

Please make sure the inlet and outlet ventilation is not blocked at all times. 

2. Operate this unit on a horizontal surface to avoid water leakage.   

3. Do not operate this unit in an explosive or corrosive atmosphere. 

4. Operate this unit in an ambient of 35 degree centigrade or less.   

5. The heating function of the unit should  be operated in an indoor ambient 

temperature between 7

 and 23

 

6. Clean air filter periodically to enjoy the most efficient cooling. 

7. When the unit is shut off, please wait at least 3.5 minutes before restarting 

this is to prevent the compressor from being damaged.   

8. This unit needs at least 7 Amps of electricity to have its compressor 

operational. To avoid the household electricity block out, please do not use 

any extension cord for this unit. 

9. This unit is for indoor cooling, heating and dehumidifying. 

10. When turning on the unit, the fan will operate but the compressor will 

 

In heating function, the heating alarm will flash for 3.5 minutes before           

the compressor and fan start up. 

11. When the supply cord is damaged, it must be replaced by the 

manufacturer, its service agent or similarly qualified persons in order to avoid hazard.

 

CAUTION

VERY IMPORTANT 

Please read this instruction guide before install and using 
your portable air conditioner unit.   
This instruction manual is the universal-purpose version 
for the units that you purchase, it might be slightly 
different from the ones described in the manual, but it does 
not affect your proper operations and usage. 

start up after the cooling alarm flashes for three minutes                              

Summary of Contents for PC26-AMEII









Reviews: