background image

Owner’s Manual

Reliable Emergency Backup Power

Congratulations! You’ve purchased the most advanced, feature-rich Inverter/Charger designed as an alternative energy source during utility
power failures. Tripp Lite APS Inverter/Chargers keep your equipment constantly up and productive through all utility power problems (blackouts,
brownouts and high voltages) by inverting DC power from user-supplied batteries into AC power. Built-in surge suppression provides an additional
level of equipment protection. When utility power is present, APS Inverter/Chargers automatically pass through power to your equipment while
simultaneously recharging your connected battery bank. APS Inverter/Chargers are the quiet alternative to gas generators during emergency
backup applications—with no fumes, fuel or noise to deal with! You get AC electricity anywhere and anytime you need it.

Better for Your Equipment

Premium Protection Levels

• Built-In Isobar

®

Surge Protection

• Automatic Overload Protection

Ideal Output for All Loads (including computers)

• Frequency-Controlled Output

• Fast Load Switching

• Balanced Load Sharing*

Better for Your Batteries

Faster Battery Recharge

• High-Amp, 3-Stage Battery Charger (adjustable)

Critical Battery Protection

• Battery Charge Conserver (Load Sense)*

• Battery Temperature Sensing*

• High-Efficiency DC-to-AC Inversion

Better for You

Simple, Maintenance-Free Operation

• Multi-Function Lights & Switches

• Moisture-Resistant Construction**

Specifications/Warranty

2

Safety

3

Feature Identification

4

Operation

5

Configuration

6-7

Battery Selection

8

Mounting

9

Battery Connection

10

AC Input/Output Connection

11

Service/Maintenance/Troubleshooting

12 

Español

13 

PowerVerter

®

APS Series

DC-to-AC Inverter/Chargers

Input

Output

Invert:

12, 24, 36 or 48 VDC

120V, 60 Hz. AC

Charge:

120V, 60 Hz. AC

12, 24, 36 or 48 VDC

1111 W. 35th Street, Chicago, IL 60609 USA

Customer Support: (773) 869-1234

www.tripplite.com

* Available on all models except 612, 750 and 1250 models. ** Inverter/Chargers are moisture-resistant, not waterproof. 

Copyright © 2004. PowerVerter

®

is a registered trademark of Tripp Lite. All rights reserved.

Contents

W

arranty

Registration

Register on-line toda

y f

or a c

hance

to win a FREE 

Tripp Lite pr

oduct!

www

.tripplite

.com/warranty

200407140  120V APS Owner’s Manual.qxd  9/16/2004  9:58 AM  Page 1

Summary of Contents for PowerVerter APS 1012














Reviews: