APPROVALS:
Specifications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8"
(millimeters rounded up to next whole number)
.
ROUGH-IN DATA
St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366
(636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
Parts Dept. (800)424-TRUE • Parts Dept. FAX# (636)272-9471
Model:
TRUE FOOD SERVICE
EQUIPMENT, INC.
Project Name:
Location:
Item #:
Qty:
Model #:
AIA #
SIS #
Printed in U.S.A.
TR1HRI89-1S
TR1HRI89-1S
Model
Solid
Doors
Capacity
(Cu. Ft.)
(liters)
Cabinet Dimensions
(inches)
(mm)
L
D
H*
Watts
Voltage
Amps
NEMA
Config.
Cord Length
(total ft.)
(total m)
Crated
Weight
(lbs.)
(kg)
TR1HRI89-1S
1
37
1048
35
889
34 1/2
877
88 3/4
2255
2000
115/208-240/1
8.3
14-20P
9
2.74
325
148
* Height does not include 1
"
(26 mm)
for system mechanical components.
Plug type varies by country.
Requires 115/208 -240/60 Hz, single phase, 3 pole, 4 wire circuit.
3/04
Provides cabinet holding
temperature of 80˚F to 180˚F
(26.67˚C to 82.22˚C).
Internal fan provides low velocity,
forced-air heat distribution
to assure even temperatures
throughout the cabinet.
(2) stainless steel 1000 watt finned
tube heating elements per section
for uniform generation of electric
heat. Cabinet comes with a total of
2000 watts.
300 series stainless steel exterior
front and interior. The very finest
stainless; higher tensile strength for
fewer dents and scratches.
(3) lifetime guaranteed, cam-lift
hinges per door. Full 180 degree
open capability with a stay open
feature at 120 degrees.
Designed to accept roll-in racks
(inboard castors) with a maximum
dimensions of 27"L x 29"D x 72"H
(686 mm x 737 mm x 1829 mm). (1)
heavy gauge stainless steel ramp
standard per door.
Entire cabinet structure and solid
door is foamed-in-place using high
density, CFC free, polyurethane
insulation.
S
AV I N GS
E
N E
R G
Y
S
®
C
US
R
TR Specification Series:
Roll-In Solid Door Heated Cabinet - 89" High
