background image

 

_______________ 
TSI and TSI logo are registered trademarks of TSI Incorporated. DustTrak is a trademark of TSI Incorporated. 
Netronix  and Thiamis are trademarks of Netronix Inc. Digi and XStream are trademarks of Digi International.  

 

 

INSTALLATION GUIDE 

INSTALLING

 

THE

 

NETRONIX™

 

THIAMIS™

 

1000 

GSM/GPS

 

COMMUNICATION

 

MODEM

 

IN 

THE

 

ENVIRONMENTAL

 

ENCLOSURE 

MODEL 8535

 

 

This guide will help you quickly install the Netronix

™ 

Thiamis

™ 1000 GSM/GPS Communication Modem into 

the Environmental Enclosure Model 8535.  

Unpacking Netronix Thiamis 
GSM/GPS Communication 
Modem (801901) 

1.  Unpack the Netronix Thiamis GSM/GPS 

Communication Modem (801901) for the 
Environmental Enclosure (8535) and verify that all 
the items listed in the following table are present.  

2.  Contact 

TSI

 immediately if items are missing 

or broken.  

 

Qty. 

Item Description 

Reference Picture 

Adapter Plate 

 

4-40 x 5

/16” LG Pan Head 

Screws 

 

Power Cable 

 

Spare Fuse 

 

6-

32 x 3/16” LG Pan 

Head Screws 

 

Qty. 

Item Description 

Reference Picture 

Netronix

 

Thiamis GSM/GPS 

Communication Modem 

 

RS232 to USB Converter 
Cable 

 

Netronix Environet Quick 
Start Guide 

 

Environet Account Creation 
Form 

 

GSM/GPS Antenna 
(not used) 

 

Summary of Contents for DustTrak 8535

Page 1: ...closure Model 8535 Unpacking Netronix Thiamis GSM GPS Communication Modem 801901 1 Unpack the Netronix Thiamis GSM GPS Communication Modem 801901 for the Environmental Enclosure 8535 and verify that all the items listed in the following table are present 2 Contact TSI immediately if items are missing or broken Qty Item Description Reference Picture 1 Adapter Plate 4 4 40 x 5 16 LG Pan Head Screws ...

Page 2: ...ot needed for this assembly It is only needed when the modem is installed inside a metal enclosure The modem s built in antenna will be able to acquire the cellular signal through the 8535 Environmental Enclosure Installing the Netronix Thiamis 1000 GSM GPS Communication Modem 1 Using the screw driver fasten the adapter plate to the base bracket using the 4 40 x 5 16 pan head screws qty 4 2 Remove...

Page 3: ...e DustTrak monitor and the black Phoenix connector to the modem The third connector is for the heated inlet control module If the heated inlet is not present it can left unplugged 7 Connect the other end to the power cable to the power source Same connection will be made if using the solar power system accessory instead of the 12V DC power adapter 8 Plug the AC DC power supply into an AC power sou...

Page 4: ...rporated Printed in U S A 9 LED on the modem will blink while the modem searches for a network If the LED stops blinking and is solid blue a network has been found and proper communication with Environet should be possible If the LED changes to solid yellow the modem has not found a network A power cycle may resolve the issue 10 To utilize the telemetry functionality of Thiamis 1000 please refer t...

Reviews: