TSUNAMI-500 OPERATING AND MAINTENANCE
Page 1 of 9
1)
Installation Setup
A)
Power source:
The T-500 requires a Plug-in style 220V 50 AMP power source.
(An alternate Hardwired style power source is also available.)
B)
Power hookup:
The Plug-in style power cord attaches as shown. Lift the cover plate and insert the plug.
C)
Power On & Off:
In the lower-level section, the Power On & Power Off switch is located on the right side
of the power control box behind the filter door.
Move the switch to the “
POWER ON
”
position.
