background image

PAGE 1 OF 15 

0521 IH-1096

1-800-295-5510

uline.com

π
DELUXE  

COUNTING SCALE

H-1096, H-1097

H-1098, H-1099

INSTALLATION

UNPACKING 

1.  Unpack and verify the following components have 

been included: 

•  Scale unit 
•  Instruction manual 
•  Weighing pan 
•  Power adapter 
•  Allen wrench
•  Four head cap screws

2.  Save the packaging material. This packaging ensures 

the ideal protection for the storage or transport of the 

product. 

LEVELING

1.  Retract the right rear foot (A) completely into the 

scale. (See Figure 1)

2.  Adjust the two front feet (A) until the leveling bubble (B) 

is centered in the circle. (See Figure 1)

3.  Extend the right rear foot until it contacts the mounting 

surface. Make certain that all four feet are contacting 

the mounting surface. 

4.  Make certain the scale is stable by placing both 

hands on the scale platform and attempt to rock 

the scale. If it moves, adjust the leveling feet until the 

scale stands firmly on the mounting surface. 

ASSEMBLY

1.  Using the Allen wrench and head cap screws 

provided, secure the pan support (C) to the four posts 

(D) over the sensor (E). Next, place the weighing pan 

(F) over the pan support. (See Figure 2)

A

B

Figure 1

C

D

E

F

Figure 2

Para Español, vea páginas 6-10.

Pour le français, consulter les pages 11-15.

Summary of Contents for H-1096
















Reviews: