1013 IH-2034
PAGE 1 OF 5
IMPORTANT! Read this manual thoroughly
and familiarize yourself with ALL controls and
operating features. Keep this manual for future
reference and maintenance.
Unpacking: Check the machine for damage.
If damage is found, return to Uline.
MACHINE SPECIFICATIONS
•
Package Size Capabilities: Tunnel 16" x 8"
•
Speed: Will vary with length of package.
•
Power Supply:
220 volt, 10 amp mesh belt conveyor
•
Overall Dimensions: 32"L x 27"W x 28"H
TUNNEL STANDARD FEATURES
•
2,100-Watt tunnel heating power
•
360-degree air circulation
MESH BELT CONVEYOR
•
Teflon coated mesh belt
•
Speed controlled tunnel conveyor. 0-60 FPM
WARRANTY
•
Full 1-year warranty on parts.
WARNING! Damage to the machinery can
be caused by (but not limited to): electrical
overload, mechanical overload, incorrect
power source, lifting and/or moving the
equipment improperly, and misuse of
assemblies. Any damage from the above
constitutes misuse and/or abuse and we will not
be covered by the manufacturer’s warranty.
This manual contains multiple precautionary
notes indicated with the word "CAUTION" and/
or "WARNING". Such notes are used to describe
functions that can cause bodily injury and/or
damage to the machine. Notes marked with
"WARNING" indicate a condition that can cause
harm to a person. Notes marked with "CAUTION"
indicate conditions which can cause damage
to the machine.
It is the employer’s responsibility to ensure all
personnel associated with the operation of
this machine are adequately trained in the
operation, safety precautions and potential
hazards of this machinery.
SPECIFICATIONS
H-2034, H-2035
SHRINK TUNNEL
