PAGE 1 OF 2
1018 IH-3736
CROWD CONTROL
BARRIER POSTS WITH
RETRACTABLE BELT
π
1-800-295-5510
uline.com
H-3736, H-4206, H-5097
H-6417, H-6454, H-7079
H-7080
BELT CASSETTE REPLACEMENT INSTRUCTIONS
TOOL NEEDED
Phillips Screwdriver
1. Loosen the four bottom screws securing the cassette
into the post. (See Figure 1)
2. Slide the cassette out of the post. (See Figure 2)
3. Loosen the lower screws slightly on the replacement
cassette, but do not remove them completely.
(See Figure 3)
WARNING! Do not loosen the top screws.
This will break cassette.
4. Fit the replacement cassette into the slots in the top
of the post. (See Figure 4)
5. Slide the cassette all the way down the post slots.
(See Figure 5)
6. Tighten screws securing the cassette into the post.
(See Figure 6)
NOTE: Do not overtighten, as this may affect
the belt retraction.
Figure 1
Figure 4
Figure 5
Figure 3
Figure 2
Figure 6
