PAGE 1 OF 6
0721 IH-7209
TOOL CABINETS
1-800-295-5510
uline.com
H-7209, H-7210
H-8575
CAUTION! Do not open more than one loaded
drawer at a time.
• Lock drawers before moving.
• Do not stand on the product. You may fall, which
may cause personal injury.
• Do not mount the product on truck bed or any other
moving object.
• Apply brakes on swivel casters when not moving unit.
• Do not pull. Push to move.
• Do not step in the drawers. You may fall, which may
cause personal injury.
• Lubricate the top and bottom channels of the
drawer slides at least twice a year.
PARTS
SAFETY
ASSEMBLY
TOOLS NEEDED
10 mm Combination Wrench
14 mm Combination Wrench
Figure 1
Tool Cabinet x 1
M6 x 12 Bolt x 4
(8 for H-7210)
M10 x 25 Bolt x 16
Drawer Liner x 4
(6 for H-7209)
(11 for H-7210)
Swivel Caster x 2
Rigid Caster x 2
Handle x 1 (2 for H-7210)
Cabinet Key x 2
ATTACH HANDLE(S)
1. Align holes on the handle with holes on the side of
tool cabinet. (See Figure 1)
2. Insert four M6 x 12 bolts through the holes in the
handle. Secure using 10 mm combination wrench,
but do not tighten.
3. Once all screws are installed, tighten screws
completely.
4. If tool cabinet came with two handles (H-7210),
repeat above steps on opposite side of tool cabinet.
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
M6 x 12 Bolt
