PAGE 1 OF 9
0122 IH-9881
H-9881, H-9882
H-9883
WIRE STACKABLE
BIN ORGANIZERS
1-800-295-5510
uline.com
PARTS
INSTALLATION OF SELF-LEVELERS AND OPTIONAL CASTERS
TO INSTALL SELF-LEVELERS
NOTE: If installing casters, do not install
self-levelers.
1. Ensure post is positioned as shown. (See Figure 1)
2. Insert self-leveler into open end of post.
3. Use rubber mallet or tap on ground until
self-leveler slides into post.
4. Repeat steps 2 and 3 for other posts.
TO INSTALL OPTIONAL CASTERS
1. Make sure post is positioned as shown. (See Figure 2)
2. Engage the wheel brakes to keep casters from
rolling during assembly. Use a rubber mallet to tap
caster stems into posts. (See Figure 2)
Figure 1
Figure 2
Post x 4
H-9881, H-9882: Shelf x 10
H-9883: Shelf x 6
H-9881, H-9882: Shelf Support x 40
H-9883: Shelf Support x 24
Leveler x 4
Para Español, vea páginas 4-6.
Pour le français, consulter les pages 7-9.
