0509 IH-99
PAGE 1 OF 5
1-800-295-5510
uline.com
AUTOMATIC
TAPE SHOOTER
H-99
H-99
NOTES
FEATURES
• If using automatic feed, when one piece of tape
is removed, the unit will automatically feed and
cut the next piece at the preset length.
• The tape length is easily seen on the LED display,
and operation is simple. Press the CM key or MM
key to set the length. (Setting limit 20mm
to 999mm.)
• If a piece of long tape is needed, press the
ADVANCE key for desired length, then press CUT
key to cut.
• The blade unit can be removed and replaced
easily. (Tape jamming is also easily fixed by
removing the blade unit.)
Do not leave the tape dispenser
in direct sunlight.
Do not drop the tape dispenser
or subject it to heavy shocks.
Do not use volatile liquids (benzine,
thinner, etc.) to clean the dispenser.
Wipe with dry cloth only.
Do not use the tape dispenser
in humid or dusty places.
Do not insert bars or plates into
the tape outlet-this will damage
the blades.
DO NOT insert your fingers into
the tape outlet!
