PAGE 1 OF 12
0322 IH-9601
H-9601
KOALA KARE™ VERTICAL
BABY CHANGING STATION
1-800-295-5510
uline.com
PARTS
TOOLS NEEDED
Phillips Screwdriver
Level
Stud
Finder
Measuring Tape
Drill
1/8", 7/32" Drill Bit
(regular and masonry)
INSPECTION CRITERIA
A properly maintained baby changing station
operates like the following:
• Opens and closes smoothly.
• Has a functioning strap and buckle. Strap is
held firmly in place when buckle is depressed
over it.
• Has a fully stocked liner dispenser.
• Provides a clean, convenient place for
customers to attend to their children.
RESTRAINT SYSTEM
1. Check strap by releasing the lever on the buckle and
pulling one end of strap up through the bottom of the
buckle, depressing the lever when the strap is tight.
Give the strap a tug in the horizontal direction away
from the buckle, checking that the strap remains
in place beneath the buckle. To loosen the strap,
release the lever and pull the strap from the bottom
of the buckle.
SAFETY
Para Español, vea páginas 5-8.
Pour le français, consulter les pages 9-12.
Baby Changing Station x 1
8/32 x 5/16" Flange Button
Head Phillips Screw x 4
1/4 x 3" Pan Head
Wood Screw x 6
9/32 x 7/8" Phillips
Flat Head Screw x 3
Flat Washer x 4
Wall Bag Hook x 1
Key x 1
WARNING! Never leave child unattended.
WARNING! Designed for infants only. Age up to
3.5 years and weighing less than 50 lbs. Keep
one hand on the child at all times.
WARNING! Avoid serious injury from falling or
sliding out. Always use restraint system.
WARNING! Parcels or accessory items placed,
or both placed on the unit may cause the unit
to become unstable.
